Qsources is a highly specialized company, leading in smart noise and vibration excitation technology.

Reference Sound Source for industry Geonoise Asia

Qoms1

Monopole Omnidirectional hemisphere sound source

Qoms1 is a unique small and lightweight hemisphere monopole pointsource for broadband sound measurements.

Like it’s fully omni-directional Qoms2, the Qoms1 sound source can be used for acoustic optimization of performance sites such as theaters, schools or religious sites for speech and music.

A smooth broadband spectrum from 50 – 16000 Hz and output level of Lw 109 dB allow measurements in large spaces.

he measurement can be conducted very fast and accurately at high broadband output levels (122 dB Lw). Another advantage of using Qohm is that no subwoofers are needed and it offers the highest quality in material within the smallest dimensions and extremely lightweight. This means that the product can easily be taken on-site by only one single consultant.

Weight 0.9 kg
Broadband high output 109 dB Lw
The frequency range in third-octave bands 50-16000 Hz
Diameter / Height 106 mm / 160 mm

Qoms2

Monopole Omnidirectional hemisphere sound source

Qoms2 is a next level monopole point source for broadband noise measurements with high accuracy. Room acoustics measurements such as impulse response, early or late reflections allow acoustic expert the correction and optimisation of existing sites.

A smooth broadband spectrum from 50 – 16000 Hz and output level of Lw 110 dB allow measurements in large spaces.

 

Weight 1.25 kg
Broadband high output 110 dB Lw
The frequency range in third-octave bands 50-16000 Hz
Diamete r/ Height 106 mm / 285 mm

Qsources Qohm is an extremely lightweight, high power dodecahedron sound source.

The measurement can be conducted very fast and accurately at high broadband output levels (122 dB Lw). Another advantage of using Qohm is that no subwoofers are needed and it offers the highest quality in material within the smallest dimensions and extremely lightweight. This means that the product can easily be taken on-site by only one single consultant.

Weight 3.1 kg
Broadband high output 122 dB Lw
The frequency range in third-octave bands 50-16000 Hz
Diameter 260 mm

Qsources Qohm2 is a Monopole omnidirectional sound source.

Qohm2 offers a solution to take measurements of room acoustics, reverberation and speech transfer measurements. This solution is perfect for assignments related to the sound quality of buildings such as concert halls, theatres etc. The product offers a lot of benefits compared to currently marketed speakers as its very small, lightweight and is highly accurate at a maximum sound power level of 108 dB.

Weight 1.3 kg
Broadband high output 108 dB Lw
The frequency range in third-octave bands 50-16000 Hz
Diameter 107mm

Qsources Qref is a monopole sound power reference source.

Qref can be used as a sound reference suitable for identification of equivalent sound power of machinery on-site, Statistical Energy Analysis (SEA) type of measurements of rooms, halls and other acoustically coupled systems and other airborne excitation applications. Qref offers a unique solution to measure in non-ideal acoustic conditions. The shipment includes a dedicated Infra-Qsources QamR amplifier.

Weight 0.8 kg
Broadband high output 97 dB Lw
The frequency range in third-octave bands 100-5000 Hz
Diameter 107mm

Smart DSP Signal Generator and Measurement Amplifier 

The Qam power amplifier provides an extremely high power/weight ratio for maximum portability. The internal firmware and DSP allow a very flexible use with different sound sources. The button-controlled operation is fast, straightforward, and stable. Application dependent, internally generated white/pink noise, sine sweep and pulsating noise signals are available as well as acceptance of any external signal generator. Especially for measurement in difficult small spaces, a low frequency third octave band equalizer allows adaption to the measurement space. Remote activation and de-activation up to 100m. range in free sight.  Equalization is available for the Infra-Qsources sound sources and up to 10 settings per type of sound source can be stored for standardized measurements 

Weight 2.9 kg
Max. Power output 950 Watt
Frequency range 20-40000Hz
Dimensions 245 x 190 x 90 mm
Internal noise generator √ white + pink Noise
External signal √ max.0.4 volt sspk
Equalization function

Measurement amplifier with sound power control unit and signal DSP 

The QamR power amplifier is a fully DSP controlled sound Power amplifier for noise and vibration measurement that require a high power / portability ratio.

The measurement amplilfier is individually calibrated to the Qmir or Qref sound source.

White and pink noise signals are available.

Remote control with up to 100 meter range.

Weight 2.2 kg
Max. Power output 250 Watt
Frequency range 20-40000Hz
Dimensions 245 x 190 x 90 mm
Internal noise generator √ white + pink Noise
External signal √ max. 0.4 Volt sspk
Equalization function

Qsources Qca is a compact measurement amplifier with high power + low weight.

Weight 2.4 kg
Max. Power output 1200 Watt
Frequency range 20-40000Hz
Dimensions 245 x 190 x 90 mm