Vibration monitoring Swarm (mems based)

Swarm, mems based autonomous vibration monitoring sensor

Swarm V2 sensor, the new vibration monitoring approach from Omnidots!
Vibrations measured by the Swarm are tested against the DIN4150, DIN4150-3 80Hz, BS7385 250 Hz and SBR guidelines. These guidelines are available for guidance when measuring and assessing damages and inconvenience caused by vibrations.
Swarm is a MEMS-based sensor with a frequency range of 0.5 – 100 Hz with a resolution or 0.01 mm/s with FFT dominant frequency determination.
It has a built-in GPS receiver with 10-meter accuracy.
The logging interval time can be set from 2 – 6000 seconds, possibley with a trigger level between 0.2 and 50 mm/s.
2 alarm levels can be preset, notification by Email, SMS and personal dashboard.

Swarm, mems based autonomous vibration monitoring sensor
Omnidots SWARM vibration monitoring Asia

The Swarm sensor is autonomous with a build in battery with operating time between 50 – 500 hours, depending on the data transfer (wifi / 3G).

It’s well protected up to IP65 and works in temperatures from -10 up to 70 degrees Celsius.

Read more about Omnidots SWARM here

Technical specifications Swarm V2 2018 – Geonoise

For more info please contact us.

Scroll to top